We’re going through a brand refresh! You’ll notice our logo has changed.

Reflecta-White Plus™

Light Diffusion & Dustproof Rooms

5.0

Available in Over 200 Stockists Nationwide
Bunnings Warehouse
Home Hardware
Steeline
Mitre 10 Stockist

+ more!

Reflecta-White Plus™

Light Diffusion & Dustproof Rooms

5.0

Product Highlights

Need help understanding if this product is right for you? Contact our team today and we’ll be happy to help.

Use our store finder tool to locate a retailer near you. Click the link below.

Australian Owned Icon
Australian
Owned
Local Stock Icon
Local
Stock
Over 200 Stockists Icon

Over 200 Stockists

Commercial & Residential GIBS

Commercial & Residential

Description

Reflecta-White Plus™ is the ultimate insulation choice for enhancing indoor reflective lighting performance, particularly in roofs and attics. With its exposed ice-white face and reinforced scrim foil backing featuring a thermo-cellular structure, it’s perfect for light diffusion and as a decorative finish. When used as part of the CRIS™, Reflecta-White Plus™ offers both superior thermal performance and aesthetic appeal, making it an excellent solution for roofing and attic spaces.

Installation

Reflecta-White Plus Installation Guide:

Technical

Download our technical sheet information:

Warranty

Warranty Cover

GIBS warrants the products listed below against manufacturing defects for 15 years from the date of installation. The products are also warranted on delivery to meet the applicable GIBS product specifications and the standards stated in the relevant GIBS technical literature.

Conditions

This warranty applies only where the product remains unaltered, has been correctly stored and handled, and has been installed by a suitably qualified tradesperson in accordance with GIBS installation instructions and technical information current at the date of installation.

Claims

A warranty claim must be submitted to the supplier from whom the product was purchased, together with proof of purchase and sufficient details and evidence of the fault and its extent. The supplier must forward the claim to GIBS. All expenses incurred in making a claim under this warranty are borne by the claimant.

Remedy and Liability

Where GIBS accepts a valid warranty claim, GIBS may, at its option, repair, rectify or replace the affected product. GIBS’ liability is limited to the replacement cost of the defective material, reduced proportionately according to the part of the 15-year warranty period that has expired.

The warranty applies only to the original building project and is limited to the GIBS product found to be defective.

To the extent permitted by law, GIBS gives no other express or implied warranty in relation to the product, including its fitness for a particular residential or commercial application other than its published recommended use. Subject to rights that cannot lawfully be excluded, GIBS will not be liable in contract, tort, negligence, strict liability, breach of statutory duty or otherwise beyond the obligations stated in this warranty.

Exclusions

  • damage to other products used with a GIBS product, or damage resulting from the installation of those products;
  • claims relating to another manufacturer’s product;
  • damage arising from recommendations made by a GIBS representative concerning other products, materials or combinations of products;
  • damage caused by the installation or assembly of the GIBS product;
  • incorrect installation or incompatibility with other materials or products;
  • use of the product for applications or purposes outside its intended or published recommended use, including uses outside the building and construction industry;
  • damage caused by aggressive chemicals, incompatible metals, immersion in water, chemically treated or green timber, storm, tempest or other events beyond GIBS’ control; or
  • normal fair wear and tear.

 

The buyer is responsible for determining the suitability and compatibility of other products, materials, or the environment of the installation site used with GIBS products and should obtain independent advice where appropriate.

Transfer and Change of Use

This warranty applies only to the original project and application and is not transferable. A change in building ownership or in the purpose or use of the building will cancel this warranty unless GIBS is notified beforehand and confirms that the warranty remains valid for the proposed use.

Australian Consumer Law

This warranty is provided in addition to other rights and remedies available under law.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Product Testing Analysis
Results
Thermal PerformanceASTM C518
Material Thermal Resistance0.12 (M2K/W)
Flammability IndexAS 1530.2
Ignitability IndexAS/NZS 1530.3
Spread of Flame IndexAS/NZS 1530.3
Heat Evolved IndexAS/NZS 1530.3
Smoke Developed IndexAS/NZS 1530.3
Textile TestingExtra Heavy Duty
Resistance to Dry DelaminationAS/NZS 4201.1
Resistance to Wet DelaminationAS/NZS 4201.2
ShrinkageAS/NZS 4201.3
Water PenetrationAS/NZS 4201.4
Water AbsorbencyAS/NZS 4201.6
Water Vapour TransmissionASTM E96
Edge Tearing ResistanceTAPPI T470 om-89
Surface CorrosionAS/NZS 4859.1 Appendix I
AcousticISO 354 AS ISO 11654 AS 1191 AS/NZS ISO 717.1

Specifications

Product Details
R Value Roof Inward (m2k/w)1.8
R Value Roof Outward (m2k/w)0.7
R Value Large Roof Inward (m2k/w)2.3
R Value Large Roof Outward (m2k/w)0.7
Material R Value at 23deg0.12
Roll QTY1
Roll Width (m)1.5
Roll Length (m)20
Roll Area (m2)30
Roll Diameter (m)0.37
Roll Weight (kg)10.5
Roll Size20M X 1.5M (30M2)
Product Thickness5.5MM (±0.5MM)
Silver Side Emittance0.03
Vapour Control StandardASTM E96
Application TypeCommercial, Residential
LocationRoof, Wall
Product TypeThermal & Sound Insulation
GI Building Sciences Logo

Proudly

Australian-Owned

For Insulation Projects Big and Small.

Explore More Resources

Tap into the knowledge of GI Building Sciences with our comprehensive resources.
Download Product Technical Information Icon

Download Product
Technical Information

Explore our expansive product catalog and discover everything you will need.

FAQS Icon

Frequently Asked
Questions

Get the answers you need by exploring our Frequently Asked Questions.

Main Benefits Icon

Find Your
Nearest Store

Use our store locator to find a GI Building Sciences stockist near you.

Customer Service Assistant at GI Building Sciences Insulation HQ

Here to help

We'll Take Out The Guesswork

We have an in-house engineer to help with calculations and product compatibility.

Happy Family in Australia after New Insulation Installed

True-blue

Made for Aussies.
By Aussies.

GI Building Sciences™ is a wholly Australian-owned manufacturing company. We attribute our success to strong environmental ethics, faith in the economic, political and social fabric that creates opportunity in this great country, and sheer determination to succeed.
25 Years

In the Business for 25+ Years

With over 25 years of experience, GI Building Sciences™ is a trusted Australian-owned leader in insulation and energy-efficient solutions. We partner with a wide range of stockists, serving residential and commercial clients nationwide, offering tailored solutions for diverse needs and budgets.