We’re going through a brand refresh! You’ll notice our logo has changed.

GI Building Sciences

Reflecta-Cell Plus V2™

Thermal & Sound Insulation

5.0

Available in Over 200 Stockists Nationwide

GI Building Sciences

Reflecta-Cell Plus V2™

Thermal & Sound Insulation

5.0

Product Highlights

Need help understanding if this product is right for you? Contact our team today and we’ll be happy to help.

Use our store finder tool to locate a retailer near you. Click the link below.

Australian Owned Icon
Australian
Owned
Local Stock Icon
Local
Stock
Over 200 Stockists Icon

Over 200 Stockists

Commercial & Residential GIBS

Commercial & Residential

Description

The Reflecta-Cell Plus V2™ is an enhancement of Reflecta-Cell plus with the addition of a 150mm flap providing equal coverage with less waste. It continues to outperform conventional insulation materials and demonstrate greater longevity under harsh Australian climate conditions. Suitable for almost every building type commercial or domestic, Reflecta-Cell Plus V2™ offers great performance benefits for almost every building application.

Installation

Download our installation guide:

Roof (Commercial)

Roof (Residential)

Wall (Commercial)

Wall (Residential)

Technical

Download our technical sheet information:

Warranty

Warranty Cover

GIBS warrants the products listed below against manufacturing defects for 15 years from the date of installation. The products are also warranted on delivery to meet the applicable GIBS product specifications and the standards stated in the relevant GIBS technical literature.

Conditions

This warranty applies only where the product remains unaltered, has been correctly stored and handled, and has been installed by a suitably qualified tradesperson in accordance with GIBS installation instructions and technical information current at the date of installation.

Claims

A warranty claim must be submitted to the supplier from whom the product was purchased, together with proof of purchase and sufficient details and evidence of the fault and its extent. The supplier must forward the claim to GIBS. All expenses incurred in making a claim under this warranty are borne by the claimant.

Remedy and Liability

Where GIBS accepts a valid warranty claim, GIBS may, at its option, repair, rectify or replace the affected product. GIBS’ liability is limited to the replacement cost of the defective material, reduced proportionately according to the part of the 15-year warranty period that has expired.

The warranty applies only to the original building project and is limited to the GIBS product found to be defective.

To the extent permitted by law, GIBS gives no other express or implied warranty in relation to the product, including its fitness for a particular residential or commercial application other than its published recommended use. Subject to rights that cannot lawfully be excluded, GIBS will not be liable in contract, tort, negligence, strict liability, breach of statutory duty or otherwise beyond the obligations stated in this warranty.

Exclusions

  • damage to other products used with a GIBS product, or damage resulting from the installation of those products;
  • claims relating to another manufacturer’s product;
  • damage arising from recommendations made by a GIBS representative concerning other products, materials or combinations of products;
  • damage caused by the installation or assembly of the GIBS product;
  • incorrect installation or incompatibility with other materials or products;
  • use of the product for applications or purposes outside its intended or published recommended use, including uses outside the building and construction industry;
  • damage caused by aggressive chemicals, incompatible metals, immersion in water, chemically treated or green timber, storm, tempest or other events beyond GIBS’ control; or
  • normal fair wear and tear.

 

The buyer is responsible for determining the suitability and compatibility of other products, materials, or the environment of the installation site used with GIBS products and should obtain independent advice where appropriate.

Transfer and Change of Use

This warranty applies only to the original project and application and is not transferable. A change in building ownership or in the purpose or use of the building will cancel this warranty unless GIBS is notified beforehand and confirms that the warranty remains valid for the proposed use.

Australian Consumer Law

This warranty is provided in addition to other rights and remedies available under law.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Product Testing Analysis
Results
Thermal PerformanceASTM C518 - 0.12 (m2 K/W)
Resistance to Dry DelaminationAS/NZS 4201.1 - Pass
Resistance to Wet DelaminationAS/NZS 4201.2 - Pass
ShrinkageAS/NZS 4201.3 - Comply
Edge Tearing ResistanceTAPPI T470 om-89 - Extra Heavy Duty
Surface CorrosionAS/NZS 4859.1 App 1 - Pass
Vapour Control ClassificationAS/NZS 4200.1 Table 4 - Class 2, Vapour Barrier
Resistance to Water PenetratonAS/NZS 4201.4 - Water Barrier
Electrical ConductivityAS/NZS 3100 - Conductive
Acoustic9dB in 1/3rd octave band
Surface Water AbsorbencyAS/NZS 4201.6 - High
Vapour PermeabilityASTM E96 - 0.0160 pg/N.s
Flammability IndexAS 1530.2 Low(<5)
Ignitability IndexAS/NZS 1530.3
Spread of Flame IndexAS/NZS 1530.3
Heat Evolved IndexAS/NZS 1530.3
Smoke Developed IndexAS/NZS 1530.3 1
Fall ArrestAS 4040.4 - Pass

Specifications

Product Details
R Value Wall Inward (m2K/W)1.8
R Value Wall Outward (m2K/W)1.8
R Value Roof Inward (m2K/W)3.1
R Value Roof Outward (m2K/W)1.2
Material R Value at 23Deg0.12
Roll QTY1
Roll Width (m)1.35
Roll Length (m)22.25
Roll Area (m2)30
Roll Diameter (m)0.4
Roll Weight (kg)14.3
Silver Side Reflectance97%
Antiglare Side Reflectance95%
DutyExtra Heavy
Vapour ClassificationClass 2 Vapour Barrier
Vapour Permeability0.0160 ug/N.s
Water Control ClassificationWater Barrier
Flammability IndexLow(<5)
Electrical ConductivityConductive
Silver Side0.03 IR Reflective
Antiglare Side0.05 IR Reflective
Application TypeCommercial
LocationRoof, Wall
Product TypeShed Insulation
Structure SuitabilityTimber Frame, Steel Frame, Brick
GI Building Sciences Logo

Proudly

Australian-Owned

For Insulation Projects Big and Small.

Explore More Resources

Tap into the knowledge of GI Building Sciences with our comprehensive resources.
Download Product Technical Information Icon

Download Product
Technical Information

Explore our expansive product catalog and discover everything you will need.

FAQS Icon

Frequently Asked
Questions

Get the answers you need by exploring our Frequently Asked Questions.

Main Benefits Icon

Find Your
Nearest Store

Use our store locator to find a GI Building Sciences stockist near you.

Customer Service Assistant at GI Building Sciences Insulation HQ

Here to help

We'll Take Out The Guesswork

We have an in-house engineer to help with calculations and product compatibility.

Happy Family in Australia after New Insulation Installed

True-blue

Made for Aussies.
By Aussies.

GI Building Sciences™ is a wholly Australian-owned manufacturing company. We attribute our success to strong environmental ethics, faith in the economic, political and social fabric that creates opportunity in this great country, and sheer determination to succeed.
25 Years

In the Business for 25+ Years

With over 25 years of experience, GI Building Sciences™ is a trusted Australian-owned leader in insulation and energy-efficient solutions. We partner with a wide range of stockists, serving residential and commercial clients nationwide, offering tailored solutions for diverse needs and budgets.